Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
Note reference number
1. The reference number or luminous intensity The reference number (Ref.) is a value that refers to driving lamps. According to ECE regulations, this reference number must not exceed the upper limit of 100 per vehicle. The two values of the standard high beam (left and right main headlight) are counted here in addition to the values of other mounted high beam headlights. The value is entered on the lens of approved headlights. That means if 4 headlights with a reference number of 25 each are installed, the lower two will go out when switching on. Then there are no problems. Who does not couple it with the normal high beam and puts it on an extra switch, should consider the following. The switch or display in the vehicle must light up blue and be in the direct field of vision of the driver.
Phone.: +49(0)7584-64097-87
Mail: patric.keller@truckstyler-shop.de
We offer an installation kit from Lazer Lamps that fits the radiator grille of a Dodge RAM 1500 DT Limited from model year 2019. Lazer Lamps auxiliary headlights from the Linear series are used. You can choose between the Linear 6 standard headlight or the Linear 6 Elite headlight. These are mounted in the radiator grille using precisely fitting brackets. A simple and stylish optical tuning. For a successful appearance and the ideal view in poor visibility.
Depending on your choice, the delivery includes either two Linear 6 Standard or two Linear 6 Elite LED auxiliary headlights. The matching cable set is also included, as are the brackets and necessary fixings. Installation instructions are included in the delivery. Cleaning can be carried out with warm water, a vehicle shampoo and a microfiber cloth. If the headlights are very dirty, they can also be cleaned with isopropyl alcohol. Apply the cleaning alcohol to a non-visible area of the headlights beforehand and wait approx. 12 hours to see if the surface discolors by then.
We recommend having the auxiliary headlights fitted and installed by a specialist workshop. This will prevent damage to the on-board electronics, the pickup and the headlights. Our range offers the appropriate CAN bus connection for integration into the on-board software. The headlights can also be connected to a separate switch.
There are no reviews yet.