Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
Note reference number
1. The reference number or luminous intensity The reference number (Ref.) is a value that refers to driving lamps. According to ECE regulations, this reference number must not exceed the upper limit of 100 per vehicle. The two values of the standard high beam (left and right main headlight) are counted here in addition to the values of other mounted high beam headlights. The value is entered on the lens of approved headlights. That means if 4 headlights with a reference number of 25 each are installed, the lower two will go out when switching on. Then there are no problems. Who does not couple it with the normal high beam and puts it on an extra switch, should consider the following. The switch or display in the vehicle must light up blue and be in the direct field of vision of the driver.
Phone.: +49(0)7584-64097-87
Mail: patric.keller@truckstyler-shop.de
Lazer Lamps offers an installation set with LED auxiliary headlights to fit the radiator grille of the MAN* TGE van. Additional lighting increases safety in the dark and in difficult visibility conditions. Additional LED headlights not only increase safety, but also driving pleasure and stylishly enhance the van's appearance.
Two ST4 Evolution LED auxiliary headlights are used in the installation set for the MAN* TGE. These offer very good light output in a robust and durable housing. The lens is made of polycarbonate and is also known colloquially as "unbreakable". The ST4 Evolution LED auxiliary headlights are fitted with 4 powerful LEDs that offer a considerable range and an optimum field of vision. Thanks to their slim and flat design, these LED headlights can be fitted to almost any Vehicle.
The delivery of the radiator grille set includes the matching wiring harness as well as installation instructions and the appropriate installation material. There is also a 12V relay and two Lazer Lamps ST4 Evolution LED auxiliary headlights. The installation instructions, ECE certificates and additional information can be downloaded and viewed in advance in the PDF data. A microfiber cloth and a bucket of warm water are recommended for cleaning. If the headlights are more heavily soiled and a cleaning agent is used, you should first try it out on a non-visible area of the headlight. After approx. one day, check the spot again to see whether the headlights tolerate the cleaning agent. If a change, discoloration or similar is visible, another mild cleaner should be used.
A visit to a trusted workshop is recommended for fitting and installation. Correct installation ensures problem-free operation and prevents damage to the headlights or the vehicle itself. Discuss the project for the LED auxiliary headlights with your workshop in advance. If a CAN bus connector is used, the following website will help you find the signal for your vehicle:
https://www.canm8.com/qrcode.html
There are no reviews yet.