Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
Note reference number
1. The reference number or luminous intensity The reference number (Ref.) is a value that refers to driving lamps. According to ECE regulations, this reference number must not exceed the upper limit of 100 per vehicle. The two values of the standard high beam (left and right main headlight) are counted here in addition to the values of other mounted high beam headlights. The value is entered on the lens of approved headlights. That means if 4 headlights with a reference number of 25 each are installed, the lower two will go out when switching on. Then there are no problems. Who does not couple it with the normal high beam and puts it on an extra switch, should consider the following. The switch or display in the vehicle must light up blue and be in the direct field of vision of the driver.
Phone.: +49(0)7584-64097-87
Mail: patric.keller@truckstyler-shop.de
The company Lazer Lamps offers a suitable grille set for retrofitting. The set uses two Triple R750 Standard with white position light or two Triple R750 Elite with E-Boost. Depending on the requirements and use of the vehicle, the selection of the LED auxiliary headlights is aligned. The Triple R series convinces with its appearance, reliability, durability and luminosity. Coordinated and precisely fitting mounting brackets facilitate installation in the vehicle. A stylish understatement tuning for your vehicle and a "more" in driving fun and safety.
The kit includes two Lazer Lamps Triple R750 standard or Elite LED auxiliary headlights, depending on your selection. Four grille brackets for mounting with matching bolts, nuts and washers. Four saw guides are included for faster assembly and installation. Depending on the headlight selection, the appropriate wiring harness is included. Depending on the degree of dirt and motivation, cleaning can be done with a simple microfiber cloth and a bucket of warm water. If a cleaner is to be used, apply it to a non-visible area before use and let it soak in for about a day. This procedure will allow you to see if the headlight can tolerate the cleaner or if there are any changes to the surface. If there are any changes to the surface caused by the cleaner, a different, milder cleaner should be selected. Information on cleaning and technical information can be found in the PDF data and is available for download.
The Lazer Lamps radiator grille set should be mounted and installed by a professional workshop. This prevents unwanted damage to the vehicle, onboard electronics, onboard software and headlights. Proper installation will allow for long-lasting fun and enjoyment of the LED auxiliary headlights. Discuss the project in advance with a trusted workshop.
For the search for the signal and the correct installation location for the CAN bus connector the following web page helps:
https://www.canm8.com/qrcode.html
There are no reviews yet.