Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
Note on Sinus Wave
what is a modified sine wave?Inverters with modified sine wave are a cost-effective alternative to the pure sine wave.It is possible to operate of simple devices such as hair dryer, Toaster, heater fan, fan, unregulated pumps, filter coffee machine, chargers for mobile phone, laptop, etc.A pure sine wave is required for equipment with electronic control, audio and video, coffee pod machines! what is a pure sine?Inverter with pure sine deliver the same output voltage form as the public network.This has the advantage that all electrical appliances without limitation because work also if in the future modern electrical appliances are added.The quality construction of devices ensures long-term use in RV, boat, industry and trade.
Note voltage transformer
Please note that the voltage transformer must be connected by a specialist workshop or an electrician and fused according to the power using a pre-fuse.
Voltage converter FS I input voltage 24V I power level 1000W pure sine wave I colour blue I with displayWith the FS pure sine wave voltage converter, which has a blue illuminated display, you always have an overview of the exact input voltage. The advantage of these sine wave converters is that the output voltage is sinusoidal, just like from the socket at home. Therefore, they have a better efficiency and a very good compatibility with electronic devices.In this selected variation, the voltage converter has an input voltage of 24V (car batteries) and a power level of 1000W. The converters are equipped with a USB connection (Power USB 5V - 2.1A) and have the soft start function, i.e. after switching on, the voltage converter slowly increases its output voltage until the nominal voltage is reached. An automatic switch-off in case of overload or short circuit as well as reverse polarity protection for the battery, which triggers the fuse, are of course built into the device. The device itself is made of aluminium and moulded sheet metal and thus has a stable housing. Due to the pure sine wave, all 230V devices with alternating voltage can be used.The delivery includes the voltage converter in blue, the connection cable (approx. 50 cm) and the operating instructions including the wiring diagram. A remote control (NOT included in the delivery) for these units is available as an option for self-installation, whereby you can choose whether it should be operated by cable or radio. This selected article can be used with the following articles: Electric toothbrush, shaver (5W - 30W) I Mobile phone charger (20W - 80W) I Playstation, X-Box (50W - 150W) I Refrigerator, freezer (50W - 500W) I Laptop (200W - 1000W) I Consumer electronics, heating systems (200W - 1000W) I Computer technology (300W - 1000W) I Drilling machine (450W - 1000W) I Coffee filter machine, microwave (700W - 1200W) I Coffee pad machine, fully automatic coffee machine (1200W - 1600W). Please note that the inverter has a power-dependent control of the fans. This means that the internal fans run from approx. 10% of the continuous power. If you connect a load to the inverter that remains below 10%, the fans will not start either. From an internally measured temperature of approx. 60°C, the inverter switches off completely. Details: - Voltage converter FS with display I pure sine wave- Input voltages: 24V - Power levels: 1000W- Softstart function I USB connection - Reverse battery protection I Automatic switch-off in case of overload or short circuit - Sturdy housing I colour blue- with CE mark
There are no reviews yet.
Here you select whether your vehicle has a 12V or 24V on-board voltage.
