Danger
H222 - Extremely flammable aerosol. H229 - Pressurised container : May burst if heated.Specific organ toxicity - single exposure. H336 - May cause drowsiness or dizziness.
Teroson WX 210 - high-quality corrosion protection agent - care / protection & repair Safety note:
Teroson WX 210 is a high-quality corrosion protection agent for liquid coating and cavity sealing. The wax is primarily used for preservation protection, care and repair. With its neutral flat jet spray head, the Teroson WX 210 can be used in a variety of ways, for example for vehicle underbodies. The special additional spray head, which is included in the scope of delivery, also allows this product to be used in vehicle cavities. Doors, bonnets and boot lids, as well as hard-to-reach areas, are no problem with Teroson WX210. Multiple applications are possible with these spray plugs as they cannot clog up. When applied, the wax atomises very finely, it is creep-resistant and penetrates well into fine gaps. After application with Teroson, as soon as this has dried, the anti-corrosive agent forms a plastic, tough and water-repellent film that appears colourless and transparent in a thin layer. The spray-resistant protective film permanently protects the concealed parts of the bodywork that lie under the bumpers and which are no longer sealed at the factory are ideally sealed with this product. Teroson WX 210 is the ideal long-term protection. If you want to remove the protective agent, we recommend using petroleum ether or a liquid solvent. Preparation for processing Teroson WX 210 In general, panelling and panels should be removed before using the product and any rust should be removed. This corrosion protection agent should be shaken well before use and care should be taken to ensure that it is applied at room temperature. Spraying Teroson WX210. The dust and grease-free body parts are sprayed evenly, whereby the can should be held vertically when spraying. CAUTION!!! As Teroson WX210 is a product with flammable propellant gas, care must be taken to ensure that the cavities are well ventilated before resealing, for example door panelling, and generally ensure good ventilation during the drying phase.
All reviews:
Ich bin sehr zufrieden mit dem Produkte