Cleaning the truck is quick and convenient with compressed air. The air pressure gun has a slightly curved end that fits ideally into the smallest gaps. The pneumatic spiral hose with a diameter of 8 mm reaches a length of five meters, so you can reach almost all places around and in the truck. If the dust or dirt sits a little deeper, you can increase the pressure up to 13bar. This enables "pore-deep" cleaning.
The "loading" of the gun works via an existing compressed air system. All necessary connections are included in the delivery. You can connect the hose directly, or interconnect it with the T-connector on the system. Thus one is not bound to a fixed installation place. Since the compressed air connections are "quick connectors", the commissioning is very fast and easy. The delivery includes the spiral hose with pre-assembled connections, the compressed air gun with matching connection and a T-connector. The T-connector is suitable for compressed air hoses of 8 mm.
There are different connection variants for the compressed air gun.For this, it is important to choose the right vehicle in the selection. The application variants can be selected to fit the following vehicle manufacturers:
The vehicle-specific sets contain the respective matching connecting pieces. The universal set also contains a T-piece, this is not included in the vehicle-specific sets.
The compressed air gun is intended for cleaning the truck and must also be used for this purpose. It must not be used on the head, especially the eyes, or on the body, as there is a risk of injury! If there is any uncertainty about the area to be cleaned, we recommend that you first treat only a small area with the compressed air, preferably one that is not visible.
All reviews: