Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
Note reference number
1. The reference number or luminous intensity The reference number (Ref.) is a value that refers to driving lamps. According to ECE regulations, this reference number must not exceed the upper limit of 100 per vehicle. The two values of the standard high beam (left and right main headlight) are counted here in addition to the values of other mounted high beam headlights. The value is entered on the lens of approved headlights. That means if 4 headlights with a reference number of 25 each are installed, the lower two will go out when switching on. Then there are no problems. Who does not couple it with the normal high beam and puts it on an extra switch, should consider the following. The switch or display in the vehicle must light up blue and be in the direct field of vision of the driver.
Phone.: +49(0)7584-64097-87
Mail: patric.keller@truckstyler-shop.de
Lazer Lamps ST-Evolution driving lights, compact and powerful The ST-Evolution series has been completely redesigned in 2018 to offer a more compact design for tight mounting spaces. The mounting bracket is redesigned to offer new, more versatile and flexible mounting options. The enclosure is CAE-optimized, which improves cooling and performance in various environmental and temperature conditions. Furthermore, the Evolution series is certified to IP69K. The light diffusion as well as the luminosity have been improved and now achieve a wider range. The weight has also been reduced. As with the other series of Lazer Lamps, the almost "unbreakable" polycarbonate glass is mounted. Due to the complete revision, the Evolution series can be used almost everywhere, from motorcycles to quads to trucks or even for special vehicles.What luminosity do the respective lights of the Evolution series offer?The ST-2 can replace two H4 halogen headlights, an ST-4 LED can replace four H4 halogen headlights. With an ST-6 headlight, you can replace two xenon headlights, and the ST-8 light can replace eight H4 halogen headlights or two and a half xenon headlights. With the ST-12, you can replace one LED light bar or four xenon headlights and twelve H4 halogen headlights. The comparison refers to the luminosity of the Lazer Lamps ST-Evolution series.Our tip for the assembly/installation and installation of the lamps The assembly and installation should be done by a professional workshop. This prevents damage to the LED lights and to your own vehicle. For the assembly we recommend to choose the matching cable set to the lamp, this simplifies and shortens the assembly and installation. The matching cable set can be found in our assortment as well as the CAN bus system or a 24V relay for the matching on-board voltage.The lights already come with the appropriate mounting bracketsAs you can see in the pictures, the ST-2 comes with a narrow U-bracket, the ST-4 and ST-6 are shipped with a center mounting bracket, ST-8 and ST-12 come with two center mounting brackets. The mounting brackets are pre-mounted to the LED fixtures from the factory.Details:- Voltage range: 10V-32V- 11-watt LEDs- ECE Reg approval 112- ECE Reg approval 10- IP69K certified- Light temperature 5000K
There are no reviews yet.