Note includes ECE-Mark
This article has an E-mark! The E- or ECE approved items are tested throughout Europe and are valid for use on motor vehicles.It is a marking of compulsory components. ECE means that this exam is valid throughout Europe, a Europe-wide CE mark.Nevertheless, the legal regulations and the approved light intensity must be observed during installation. Prior consultation with the responsible inspection authority in the respective country and installation by a specialist workshop is therefore strongly recommended.
LED combination rearlight - 12V-24V - tail light I stop light I indicator - oval design With this LED multi-chamber light, which can be mounted horizontally or vertically with an operating voltage of 12V to 24V, you can give the rear of your vehicle a special eye-catcher. Thanks to the latest LED technology, the light is absolutely maintenance-free. Of course, the LED multi-chamber luminaire is equipped with an ECE test mark and thus meets the specified requirements for road traffic approval. This radiant product is attached by means of 2 screws which are included in the scope of delivery. The dimensions of the light are 13.64 cm in length, 9.1 cm in height and 4 cm in depth, and the hole spacing between the 2 screws is 1.5 cm. The LED light is equipped with a rear light, a brake light and an indicator. The white wire corresponds to ground, the black wire corresponds to the position light, the yellow wire corresponds to the indicator and the red wire stands for the brake light. Since the lamp is universal, it can be mounted on the right as well as on the left side of the rear. The lamp has a cable of 200cm YLY-S 4x0,5mm2, which means that the cable corresponds to a 4-core cable and has a length of 200 cm. The insulation of the cores is made of polyvinyl chloride (PVC) and is a thermoplastic polymer and for this purpose PVC is used which is provided with a plasticiser with regard to elasticity. Details: - LED combination rearlight / LED multi-chamber light - Tail light I Stop light I Indicator light - Operating voltage 12V to 24V- cable: 200cm YLY-S 4x0,5mm2- with ECE approval mark - indicator dynamic
There are no reviews yet.
