Foot valve for air horns This 3/2-way valve is ideally suited for installation in the foot area. The two through holes allow the valve to be mounted inside the foot area.It is an ideal addition if you want to have additional horns to the normal horn. With light pressure on the knob, the valve is opened, allowing the compressed air to flow. When the pressure is released from the knob, the valve closes and the compressed air supply is cut off. A spring sets the knob to the initial position. Compact design for easy mounting Due to the compact dimensions of LxWH: 104.4mm x 32mm x 40mm and the low weight of 220 grams, the valve can be easily mounted in the footwell. The mounting should be set in such a way that the valve can be easily and comfortably operated with the foot. Two through holes on the side are used to mount the valve.The valve is released with very little force. Releasing the valve closes it. An integrated spring allows the button to spring back to its original height as soon as you move your foot from the valve.The actuating knob is screwed on at the top, the flat nut is used to set the amount of compressed air. The nut also determines how far the knob can be pushed in. There is a threaded hole and a hole on the side, these are used for the compressed air connection. Our tip for installationCaution is advised with compressed air, Do not exceed the specified max. pressure, this will cause considerable damage to the valve and the compressed air circuit, possibly also to the connected horns. We recommend having the installation or assembly carried out by a suitable specialist workshop! Dimensions: - Length max.:104,4mm - Width max.: 32mm - Height max.: 40mmThe following materials are used: - Base body made of steel - Knob and head cover made of plastic - Galvanised steel screws and nuts - Internal thread in knob made of brassDetails: - Seals are made of NBR (nitrile butaide rubber = synthetic rubber)- Working range :10 C° - 60 C° - min. pressure: 6 bar - max. pressure: 12 bar - Weight: 220 gram - LABS conformity: VDMA24364-B/B2-L - Control: direct - Control travel: 8mm- Operating medium: cleaned compressed air
This 3/2-way valve is ideally suited for installation in the foot area. The two through holes allow the valve to be mounted inside the foot area.
It is an ideal addition if you want to have additional horns to the normal horn. With light pressure on the knob, the valve is opened, allowing the compressed air to flow. When the pressure is released from the knob, the valve closes and the compressed air supply is cut off. A spring sets the knob to the initial position.
All reviews:
richtig geil und sau Schnell ich werde bei euch noch weiter ein kaufen