Controller LED control to synchronize flashes Here you get an electronic component which is used to synchronize the flash frequency of LED warning lights. The module has 2 channels and is therefore best suited to flash different areas synchronously. For example, you can synchronize all front flashers on the first channel and run the roof flashers synchronously on a second channel. The mode of the frequency is changed by switching a button on the SW in between, which then simply switches the mode by long press. Supply voltage: 12/24 V Description of the wires coming from the synchronizer: - PWR - for the power supply (white - ground, black - "+") - SW - for connecting a monostable switch* (to change the mode) - OUT 1 - channel 1. for the connection of synchronized lamps (the colours of the cables correspond to the colour of the wires of the lamps) - OUT 2 - channel 2. for connection of synchronized lamps (the colours of the cables correspond to the colour of the wires of the lamps) Types of work according to customer requirements: 1. all lamps flash simultaneously ? Connect the lamps to one of the channels ("OUT 1" or "OUT 2"). 2. the lamps work alternately ?. The lamps should be connected to both channels. Up to 10 warning lamps can be connected to the synchronizer. You can connect a combination of lamps. The channels do not need to be loaded equally (e.g. one lamp can be connected to one channel and 4 lamps to the other channel). Cable specification: - 2 cables 2 × 0.75 mm2 , 1 m, for power supply and for connecting the switch - 6 cables 1 × 0.75 mm2 , 0.2 m, for connecting warning lights (3 wires per channel)
All reviews:
Alles super wie immer. Bin nichts anderes gewöhnt